CyberOptics SE Series
Pre-Owned Inline 3D SPI
Inline 3D solder paste inspection from the manufacturer with more than 3,000 SPI systems installed worldwide, refurbished and warranted by ASC.
The SE Series sits in the line after the printer and measures every paste deposit for height, area and volume. Feed those measurements back through CyberPrint OPTIMIZER and the printer corrects itself before a bad board reaches placement. Buying the platform pre-owned is the usual route to matching an SE that is already running on your floor, or to getting inline SPI without new-equipment budget.
SE Series Models
Click any model for its brochure. Configuration, conveyor width and software version are quoted against your line, so confirm current stock before you plan around a specific unit.
- Flagship of the SE line
- High-speed 3D paste measurement
- Closed-loop printer feedback
- SMEMA conveyor integration
- Phase-shift measurement technology
- Height, area and volume per deposit
- Real-time SPC output
- Smaller line footprint
- Proven earlier inline platform
- Full 3D volume and height
- Automated program generation
- Compact cabinet
- Entry point into the SE line
- Inline paste inspection
- Matches older SE installations
- Availability varies
If pre-owned is the wrong call
A used SE makes sense when you are matching an existing installation or working to a fixed budget. It makes less sense when you are putting inline SPI on a line for the first time, because you inherit someone else's service history and the software stops where the platform stopped. If this is a new line rather than a second one, look at what ASC builds now.
Worth a look if
- You already run an SE on one line and want a second that programs and behaves identically.
- You need inline SPI rather than offline, and new-equipment pricing has stalled the project.
- Your printer is the bottleneck on yield and you want closed-loop correction rather than after-the-fact reporting.
- You are replacing a failed SE and need the same footprint and SMEMA handoff.
What you get with it
Every pre-owned system leaves ASC disassembled to component level, rebuilt with OEM-grade parts, recalibrated against traceable standards, and documented. It ships with a calibration certificate, an inspection report, and warranty coverage, and it is supported by the same engineers who support the new equipment.
Read the six-step refurbishment processCheck Current Availability
Stock on the CyberOptics SE Series turns over. Tell us the board size, throughput and budget you are working to and we will tell you what is on the floor.